
If you have your own swimming pool, make sure you keep the water crystal clear at all times. But it may be difficult for you if you are a beginner. A little bit of algae growth is not a big problem. But if you get back to your pool after a few weeks, you may notice a lot of algae in the pool. In this article, we are going to give you a few tips on how you can clean a green swimming pool. Read on to find out more.
Often, when I get back to my home after a few weeks of vacation, I often find this green thing in my pool. Partly, it’s because of suspended maintenance due to my absence. This risk goes up when the pool is covered in the hot season. The reason is that the cover creates a greenhouse effect, which provides the best environment for algae to thrive.
Without further ado, let’s check out some simple steps that you can take in order to clean your green pool.
- First of all, you may want to use a net to collect any debris that appears on the surface of the water.
- Your second step is to clean the skimmers and spread new nets in place.
- Now, you should brush the floor and walls of the swimming pool. This will help you scrap the algae from the walls much faster.
- The built-in pump filter should also be cleaned properly to unblock it.
- Backwash the sand filter, which may not take more than a few minutes. After you have cleaned it, the filtration system will start working at the best rate of flow. As a result, there won’t be any water flow problems.
- Algae grows faster when the pH level of the water is not right. So, you should check the pH level and get it to the optimal level. This is important for the chemicals to work the best way. On the other hand, if the pH level is not adjusted, don’t go to the next step.
- Chlorine can also be used to achieve the goal as it serves as a shock treatment. All you need to do is follow the instructions given on the label of the product based on the size of your pool.
- Put flocculant in the skimmer baskets as the product helps bind small particles into larger ones. This allows the particles to get trapped in the sand filter.
- After 12 hours, you need to backwash the sand filter once again. If you notice that the skimmer nets are clogged, make sure you get them replaced as soon as you can.
After the filter system has run for 24 hours, you will see that the pool is free of all living algae. Finally, you just need to clean any dead material collected at the bottom of the pool.
Long story short, if you follow these steps, you can easily clean your green swimming pool. Alternatively, you can hire a reliable swimming pool services provider. These providers also help with the swimming pool installation.